Other Materials
Glass fibers are good thermal insulators because of their high rate of surface area to weight ratio. However, an increased surface area makes it much more vulnerable to chemical attack. Fiberglass blocks trap air between them, making fiberglass is a good thermal insulator with thermal conductivity of 0.05 W/(m.K)7. Presentation: It can be manufactured as pieces but commonly handled in plates, cords and fabrics.
Ver Más
Also known as Guarnital it is a vegetable fiber paper seal, specially impregnated to provide high resistance to petroleum products, solvents and lubricating oils, convenient to operate at temperatures up to 120 ° C. Presentation: Rolls of 75 centimeters wide by 50 meters long or rolls of 1.50 meters wide with thicknesses of 1/64 ", 1/32" and 1/16 ".
Ver Más
This material is often used in engines required to withstand temperatures of 200 ° C to 220 ° C, it is a flexible product with high mechanical strength. It can be used in most electrical equipment. Presentation: Coils of 910 mm and cutting ribbons.
Ver Más
Plastic
This material is considered one of the plastics of greater transparency and surface gloss, but also high rigidity and fragility. It is easily processablever over 100 Cº and can be given multiple shapes. Presentation: Rolls of different means.
Ver Más
Rigid plastic with lower thermal conductivity of almost all thermoplastics commonly used in televisions and housing refrigerator doors. Presentation: plates of different thicknesses.
Ver Más
This material is widely accepted because of its flexibility, good chemical resistance, lack of odor, non-toxicity, low permeability to water vapor, excellent electrical properties and its lightness. It is used in pipes, fibers, films, electrical insulation, coatings, packaging, household utensils, surgical equipment, toys and fantasy articles. Presentation: thin rolls for all types of packaging.
Ver Más
Rigid plastic designed for both food industry (particular or commercial) to chop food. The matte textured finish on both sides prevents the knife from slipping losing its edge. Complies with FDA standards. Presentation: Plates, rods and injected.
Ver Más
Easy to process transparent material because it can be manufactured under any mechanical process. It has great flexibility, is not chemically attacked by water, economic and very good thermal resistence so it can be used for pieces with low technical specification. Presentation: Injected to measure.
Ver Más
Material commonly known as dry ice, its widely used in the field of packaging a variety of products, thanks to its high protection and thermal insulation, its lightness and ease of forming. Presentation: Blocks that can be cut to size.
Ver Más
Economic rigid plastic with excellent electrical insulation properties and approved by the FDA for food uses. Presentation: Bars and plates.
Ver Más
Economic, rigid, lightweight plastic, resistant to high tensile, compression, impact and most acids. Temperature resistance up to 110 ° C. Presentation: Plates and bars and can be injected to measure.
Ver Más
Commonly known as PVC, its the most versatile elastomer bouquet and can be made in two shapes: rigid, for packaging, windows, pipes and more, which has largely replaced iron. Flexible PVC is used for cables, toys, shoes, flooring, coatings, stretch ceilings and is known for its dimensional stability and environmental resistance, also recyclable by several methods. Presentation: rigid 1.22 meters by 2.44 meters plates and thickness from 0.75 millimeters to 25.4 millimeters. Flexible plates from 1 to 3 millimeters thick and from 8 cm to 30 meters.
Ver Más
It is a material that binds the functional characteristics of vulcanized rubber with thermoplastic injection facility. It is used to make bumpers, wheels and much more, as it has high chemical resistance. Presentation: injected to measure.
Ver Más
Elastomer known as ABS, resistant to high impact. Frequently used by the automotive and industrial industry because of its high resistance to abrasion and low water absorption. Presentation: injected to measure.
Ver Más
Plastic with high rigidity and low coefficient of friction. Known for its high anti-adhesive properties. Presentation: Plates, rods, ribbons and laces.
Ver Más
Plastic that can replace metals. It has low coefficient of friction and abrasion resistance, reduces lubrication requirements, eliminates corrosion, improves wear resistance and provides a good noise attenuation. It is lighter than metals which saves energy and prolongs the life of the equipment material. This material is ideal for parts of electrical equipment, and because it doesn't produce a spark it can be installed in flammable, explosive or highly combustible environments. Presentation: Plates of various sizes and rolls in widths of 1 meter or 1.22 meters and 10 meters long.
Ver Más
We manufacture polyurethane parts in a wide range of hardnesses and shapes. Its excellent cut, wear and impact resistance gives advantage compared over other elastomers. Presentation: Rolls, bars and custom made.
Ver Más
Rubber
Specially formulated material that's manufactured with the combination of rubber and cork. It provides high load capacity with resistance to oils, spirits, water and cutting fluids. Presentation: Rolls.
Ver Más
Material which has exceptional elasticity, strength and resistance to cuts, tears and abrasion. Its main uses are: all kinds of coatings, belts and hydraulic pumps. Presentation: Roll of 1.22 meters by 10 meters long.
Ver Más
Material specially formulated for high temperatures from -70 ° C to 250 ° C. Presentation: Cords and plates
Ver Más
Rubber with a high capacity of waterproofing to water and acids. It is used in the creating industry, electric equipment and protections for the chemical industries. Presentation: Plates and cords.
Ver Más
Crumb rubber that can be used in different ways. It does not maintain the same properties as virgin material. It's cheap and useful parking bumpers and other products. Presentation: Granules from 1.0 to 3.0 mm in bags of 20 to 200 kilos.
Ver Más
Specially formulated for contact with food and beverages including drinking water. It is resistant to oils and its components are non-toxic. Certified by the FDA. Presentation: plates and rolls in widths of 1 meter or 1.22 meters and 10 meters long.
Ver Más
Specially formulated for contact with food and beverages including drinking water. It is resistant to oils and its components are non-toxic. Certified by the FDA. Presentation: plates and rolls in widths of 1 meter or 1.22 meters and 10 meters long.
Ver Más
Natural rubber (Amber) also known as "pure gome". It has a characteristic maximum resistance, elongation and flexibility that characterizes it. It is used when a soft but with high abrasion resistance material is required, commonly used in sandblast process rooms and in installations where it is required that the walls withstand impacts. Presentation: Plates and rolls in widths of 1 meter or 1.22 meters and 10 meters long.
Ver Más
General uses elastometer with economical price used for preparation of flanges, gaskets, dampers and where elasticity is required at a low cost. Ideal for absorbing sound and vibrations. Presentation: Plates and rolls in widths of 1 meter or 1.22 meters and 10 meters long.
Ver Más
Special rubber for high temperature up to 250 ° C, resistant to all kinds of acids, gasoline, oils and weathering. Presentation: Plates of various sizes and rolls in widths of 1 meter or 1.22 meters and 10 meters long
Ver Más
Special rubber for outdoor use and contact with fresh and salt water, withstands exposure to the outside continuously in extreme climates, its commonly used as a seal. Presentation: Plates and cords
Ver Más
Economic rubber that is used to produce parts that will be exposed to weathering. The operating temperature range is -20 ° C to 80 ° C. Presentation: Plates of various sizes and rolls in widths of 1 meter or 1.22 meters and 10 or 15 meters long
Ver Más
Sponges
Similar to asbestos that can be used freely because its friendly to use material. Presentation: Plates, tapes and cut into shapes.
Ver Más
Group of naturally occurring minerals that exist in the environment as bundles of fibers that can be separated into thin and durable threads. These fibers are resistant to heat, fire and chemicals and do not conduct electricity. For these reasons, asbestos has been used widely in many industries. Presentation: Plates, cut into ribbons and figures
Ver Más
Plastic sponge that has a very fine and uniform cell structure, and offers superior chemical resitance. It has excellent shock absorption and thermal insulation properties and mechanical strength and exceptional durability. Its ultra smooth surface allows easy heat lamination and adhesive. Presentation: plates of different thicknesses.
Ver Más
Wind resistant, cold insulation, nonwoven fabric that resists the action of rain and fire which makes it ideal for industrial and textile applications. It commonly used in special seals. Presentation: Plates, ribbons and laces.
Ver Más
Sponge with the same properties as the solid silicone except for its hardness as it is softer and has more open pores. Presentation: Plates, rolls, profiles and cords.
Ver Más
Sponge with the same functionality as the standard neoprene except that it is smoother by allowing it to be used as any kind of seal or filter. Presentation: Plates, profiles and cords.
Ver Más
Panels against noise and echo for recording studios, home studios, rehearsal rooms and more. Presentation: Gray rat color with eggshell finish or smooth rolls of 1.20 meters by 2 meters
Ver Más
Closed pore sponge commonly used in handicrafts and footwear as cushioning thanks to its excellent memory. Presentation: Block to the size of required thickness.
Ver Más
¿Tienes alguna duda?
Si tienes alguna duda no esperes en contactarnos, un ejecutivo te contestara.